产品：电液动平板闸门

别称：电动闸门，液动闸门，平板闸门

供应商：河北兴淼水工设备厂

厂家类型：生产，制作，销售，安装，维修

使用范围：渠道及水库的拦水蓄水农田灌溉等水力市政工程

产品性质：加工定制型

电液动平板闸门性能特点：
1) 短结构长度可节省原料、安装空间，也有效支持管道强度 ；
2) 阀体上导向块使闸板正确运动，挤压块保证闸板有效密封；
3) 三角形的支架节省原材料，保证需要的力学性能；
4) 内部可制成V型、三角形，以适应流体调节控制的要求

电液动平板闸门应用范围：

●包裝和包装设备：如包装设备，装包机械设备，包装设备等
●金属材质的激光切割加工机械设备：如单片压延机，拉申线机，高速冲床，自动焊接机，铁丝回卷机，自动切割机，制管机械设备，绕线机等。
●机械加工制造：数控车床，车床，全自动数控机床床，专用机床等
●运送机械设备：起重设备，饲料机械，皮带输送机，卷取机，起重设备等
●造纸机械：吹膜机，纸箱子机，从隔离开关，制书机，自动切割机，打印机等。
●印刷设备：卷筒卫生纸，供料机等
●木工设备：数控锯床，木工设备，压层机械设备等
●国际商务机械设备：电子器件打印机，电脑上，打印机，铜钱点钞机，四色印刷机等
●精确测量机械设备：试验仪，使用性能试验仪，三坐标测量仪等
●食品加工设备：切肉机械设备，甜品机械设备，装瓶机械设备，面条机等
●别的：减速器，电镀工艺设备，机械制造，造纸机械，环氧树脂加工机械。

电液动平板闸门日常维护保养：

维持刹车盘液压机制动系统液压动平板闸门总程,全部制动系统便捷,灵便靠谱
1。维持刹车盘盘式刹车液压机制动系统液压动平板闸门总程，非常是制动系统盘和制动系统衬片表层清洗，使全部制动系统便捷，灵便靠谱，清洗整洁。
2。在油池中自始至终观查刹车油的总量，当液體表层正下方有标识线时，应将原来的刹车油加上到知名品牌清洗液中，使其高过标识线MM，不容许与别的知名品牌的刹车油混和，加上后，应开启出气口。应用固态后应用。
三。定期维护（一般在行车千米左右）制动系统盘薄厚，当制动系统盘薄厚低于标准值时，务必拆换制动系统盘。
4。在应用中，制动系统衬片表层不容许粘附润滑脂或刹车油，并定期维护轴套薄厚，薄厚低于标准值，液压动平板闸门应由挪动垫片替代。
5。当油在活塞杆的总泵和调节器中泄露时，务必拆换密封圈，应需注意，新密封圈务必先往刹车油中侵泡超出几小时后拆换，不可以送到装配线应用，清洗设备油CyLi。NDDS或活塞杆，务必应用自喷水溶液，不容许车用汽油或别的矿物质机油液體。

电液动平板闸门日常维护保养外语版：

Daily maintenance of electro-hydraulic plate door:
Maintain the brake disc hydraulic press brake system hydraulic plate gate total range, all the brake system convenient, convenient and reliable
58:), and 0.
1, maintain the brake disc type brake hydraulic press brake system hydraulic plate door total distance, very is the brake system disc and brake system lining surface layer
Cleaning, make all brake system convenient, convenient and reliable, clean and tidy.Ta
2. Check the total amount of brake oil from beginning to end in the oil pool, when there is a mark line under the liquid surface, the original brake oil should be added to the well-known brand cleaning fluid, make it higher than the mark line MM, not allowed to mix with other well-known brand of brake oil, after the addition, should open the air outlet. Apply after solid state
one Regular maintenance (generally in about kilometers) brake system disc thickness, when the brake system disc thickness is lower than the standard value, be sure to remove the brake system disc
4. In application, the surface layer of the lining of the brake system is not allowed to adhere to grease or brake oil, and the axle sleeve is regularly maintained to be thin and thick, which is lower than the standard value.
5, when the oil leak in the piston rod of the total pump and regulator, it is important to changing a sealing ring, should note that the new seal figure must be put in the brake oil covered more than a few hours after the conversion, application can not be sent to the assembly line, oil cleaning equipment cyl.ul, NDDS or piston rod, it is important to apply the spray solution, does not allow motor gasoline or other minerals machine oil.
Hand in
Meta responsibility path body>p