液压底轴闸门具有：

(1)总则
涂装材料必须符合国家的有关规定和设计要求。
涂装施工单位必须具备与涂装设计要求相适应的设备能力与涂装车间。
涂装的每道工序都必须经过监理工程师的认可,方可进行下道工序,直到验收出厂,其质量要求必须达到国家的有关规范和标准及设计要求。
（2)喷涂材料

设备名称液压底轴闸门
涂料品科
道数|(um)
干限顶格厚度(u m)
备让
i源
环瓦富饰底漆
30
160
在
中间漆
耳乳云快中间液2140
但除*一道

the axle hole of the supporting wheel on the door blade shall be crossed and boring with the water stop surface as the datum plane, and the axial hole coaxiality shall be no more than 0.5mm5) after the lifting lug and the door body are welded, the axial hole coaxiality shall be less than 0.5mm
 axial hole coaxiality of lifting lug plate is less than 0.5mm
 the lifting lug structure on the working gate should match the hoist and accessories.